Compact economical model

Compact Single-Station Corrugated Pipe Coiler

A compact winding setup with gentle speed adjustment and clear length monitoring.

A simple, compact and economical single-station coiler for corrugated pipe, combining stable pipe laying with inverter-and-potentiometer speed adjustment. An Autonics measuring wheel and touchscreen controller provide a user-set length alarm and real-time production-speed display.

Request This Coiler Technical Parameters

Best forCompact and economical corrugated pipe winding

ConfigurationSingle station

Compact single-station corrugated pipe coiler with a single winding reel

Configured to your pipe and coil specification

Fixed reel inside diameter: 200 mm
Reel outside diameter: 760 mm
Adjustable axial reel width: 150–250 mm

Machine overview

How this coiler fits your production.

Product description

This compact single-station corrugated pipe coiler offers a straightforward winding arrangement with stable pipe laying. Its variable-frequency inverter and potentiometer provide gentle automatic speed adjustment. Compared with a conventional torque-motor setup applying excessive pull, these gentle speed changes help reduce the risk of deforming the corrugated pipe. Pipe condition, guiding and operating settings still need to be checked with the actual profile. An Autonics measuring wheel works with a touchscreen controller, allowing the operator to set the required alarm length and view production speed in real time. The winding reel has a fixed, non-adjustable inside diameter of 200 mm, an outside diameter of 760 mm and an axial width adjustable from 150 to 250 mm. These are reel dimensions, not a pipe-size range or a confirmed finished-coil capacity.

Review the pipe specification, electrical supply and upstream line interface for this machine. Send your pipe size and required coil length to start a configuration review.

Key Features

Compact, economical single-station winding arrangement
Stable pipe laying for corrugated pipe
Variable-frequency inverter and potentiometer with gentle automatic speed adjustment
Gentle speed changes help reduce deformation risk caused by excessive pulling
Autonics measuring wheel with user-set alarm length and real-time speed display on the touchscreen
Fixed 200 mm reel inside diameter, 760 mm reel outside diameter and adjustable 150–250 mm axial width

Suitable pipe applications

Designed around the material.

Pipe stiffness, surface finish and bend radius are checked before the winding head and guide geometry are finalized. Check the supported pipe range in the specifications below.

Corrugated pipeProfile-specific corrugated tubing

Technical parameters

Machine specifications.

Specifications for the compact single-station corrugated pipe coiler, covering the reel geometry, gentle speed adjustment and length-monitoring arrangement.

Pipe application	Corrugated pipe
Winding arrangement	Single station
Reel inside diameter	200 mm (fixed; not adjustable)
Reel outside diameter	760 mm
Adjustable axial reel width	150–250 mm
Speed adjustment	Variable-frequency inverter with potentiometer
Winding-speed response	Automatic gentle speed adjustment
Pipe laying	Stable traversing
Length measurement	Autonics measuring wheel
Controller	Touchscreen controller
Length alarm	User-set alarm length
Production speed display	Real-time production speed

The 200 mm reel inside diameter is fixed and cannot be adjusted. The 760 mm value is the reel outside diameter, while 150–250 mm describes the adjustable axial width. These dimensions do not state pipe size or finished-coil capacity. Confirm pipe suitability, required operating speed, motor rating and target coil format with the project. Autonics identifies the measuring wheel; the touchscreen controller brand is not specified here.

Machine structure

Essential components, clearly arranged.

Compact single winding station

The single winding reel provides a compact arrangement with stable pipe laying. Its inside diameter is fixed at 200 mm, its outside diameter is 760 mm, and its axial width adjusts from 150 to 250 mm.

Inverter and potentiometer

Variable-frequency inverter control and potentiometer adjustment provide gentle automatic speed changes. This helps reduce deformation risk from excessive pulling while keeping the operating setting subject to the actual corrugated profile.

Autonics measuring wheel

The measuring wheel supplies production-length information to the touchscreen controller. Measuring contact and the length check should be reviewed with a representative pipe sample.

Touchscreen controller

The operator can freely set the required alarm length and view production speed in real time. Length monitoring supports the agreed operating workflow without defining the cutting or coil-handling method.

How to select

Four checks before quotation.

Provide the corrugated pipe material, outside diameter, profile drawing and a representative sample. Review bending requirements against the fixed 200 mm reel inside diameter.
Confirm that the 760 mm reel outside diameter and adjustable 150–250 mm axial width suit the required coil format. State target coil length and finished-coil dimensions separately.
Provide normal production speed and expected speed changes for configuration review. Confirm the motor rating, plant voltage and frequency rather than assuming specifications from another model.
Define the alarm-length setting and measurement acceptance check, then agree pipe cutting, coil securing, unloading and restart tasks for the single-station workflow.

Integration checklist

Confirm the line interfaces.

Actual pipe profile and reel-format suitability review
Required operating speed and electrical configuration
Length-alarm setting and measurement acceptance check
Upstream line interface and coil-handling workflow

Configuration review

Check the complete coil-handling sequence.

The photograph illustrates the equipment configuration. Final dimensions and included options are defined in the agreed quotation.

Machine configuration

Compact Single-Station Corrugated Pipe Coiler

Confirm the pipe entry path, access for cutting and tying, and how a finished coil leaves the winding head. Include your heaviest coil and available handling equipment in the review.

Discuss station layout and coil handling

FAQ

Common selection questions.

Which reel dimensions are fixed and which can be adjusted?

The reel inside diameter is fixed at 200 mm and is not adjustable. The reel outside diameter is 760 mm. Axial reel width is adjustable from 150 to 250 mm. These are winding-reel dimensions, not the pipe outside-diameter range or a statement of finished-coil capacity.

How does the coiler reduce the risk of corrugated-pipe deformation?

A variable-frequency inverter and potentiometer provide gentle automatic speed adjustment. Compared with a conventional torque-motor setup applying excessive pull, gentle speed changes help reduce the risk of deforming the corrugations. They do not guarantee deformation-free winding; pipe condition, guiding and operating settings still require review.

How are production length and speed monitored?

An Autonics measuring wheel supplies length information to a touchscreen controller. The operator can freely set the required alarm length and see production speed in real time. Autonics is the specified measuring-wheel brand; the controller brand is confirmed separately.

Which pipe sizes, production speed and motor power are available?

Send the corrugated pipe material, outside diameter, profile and required line speed for a configuration review. No universal pipe-diameter range, numerical speed rating or motor-power value is specified for this model here. Those details must be confirmed for the actual production requirement.

Does reaching the alarm length complete the coil-handling sequence?

No. The specified function is a user-set length alarm. Pipe cutting, securing the coil, unloading and restarting require an agreed operating sequence. The length alarm should not be treated as confirmation of those other functions.

Request a quote