HDPE pipe · 40–110 mm

40–110 mm HDPE Pipe Coiler

Coil 100 m of 110 mm HDPE pipe on one reel.

A single-station coiler for 40–110 mm HDPE pipe, with 100 m coiling capacity at 110 mm pipe OD. Adjustable reel dimensions and a 112-10-4 torque motor support winding at speeds up to 6.6 m/min.

Request This Coiler Technical Parameters

Best for40–110 mm HDPE pipe

ConfigurationSingle station

Wings 40–110 mm HDPE pipe coiler with orange winding arms, silver frame and separate control cabinet

Configured to your pipe and coil specification

HDPE pipe outside diameter: 40–110 mm
Coiling capacity at 110 mm pipe OD: 100 m
Maximum winding speed: 6.6 m/min

Machine overview

How this coiler fits your production.

Product description

This HDPE pipe coiler combines an adjustable winding reel with a separate control cabinet. The reel inside diameter adjusts from 1,200 to 2,760 mm, its outside diameter reaches a maximum of 3,400 mm, and the reel width adjusts from 360 to 600 mm. The winding arms are 415 mm high: this dimension governs coil build thickness and is distinct from the adjustable reel width. The specified drive is a 112-10-4, 4-pole torque motor rated at 10 N·m. Its motor torque rating is not a winding-head output torque specification.

Review the pipe specification, electrical supply and upstream line interface for this machine. Send your pipe size and required coil length to start a configuration review.

Key Features

100 m coiling capacity at 110 mm pipe OD
Reel inside diameter adjustable from 1,200 to 2,760 mm
Maximum reel outside diameter of 3,400 mm
Reel width adjustable from 360 to 600 mm
415 mm winding arm height
112-10-4 torque motor; winding speed up to 6.6 m/min

Suitable pipe applications

Designed around the material.

Pipe stiffness, surface finish and bend radius are checked before the winding head and guide geometry are finalized. Check the supported pipe range in the specifications below.

HDPE pipe coiling40–110 mm pipe production100 m coils of 110 mm HDPE pipe

Technical parameters

Machine specifications.

Published specifications for the 40–110 mm HDPE coiler shown here. The 100 m capacity applies specifically to 110 mm outside-diameter HDPE pipe.

Pipe material	HDPE
Pipe outside diameter	40–110 mm
Coiling capacity at 110 mm pipe OD	100 m
Adjustable reel inside diameter	1,200–2,760 mm
Maximum reel outside diameter	3,400 mm
Adjustable reel width	360–600 mm
Winding arm height	415 mm
Torque motor model	112-10-4
Motor poles	4
Rated motor torque	10 N·m
Maximum winding speed	6.6 m/min

Select the reel setting for the actual pipe wall thickness or SDR, permitted bend radius and finished-coil handling. The dimension limits do not imply that every minimum and maximum setting can be combined. The 415 mm arm height governs coil build thickness; it is not the adjustable 360–600 mm reel width.

Machine structure

Essential components, clearly arranged.

Adjustable winding reel

Inside diameter adjusts from 1,200 to 2,760 mm; the maximum outside diameter is 3,400 mm.

Winding arms

The 415 mm arm height governs coil build thickness. Reel width is separately adjustable from 360 to 600 mm.

Pipe entry guide

The entry guide directs HDPE pipe toward the reel; alignment is reviewed with the upstream line.

Torque motor and controls

112-10-4 torque motor, 4 poles and 10 N·m rated motor torque, with a separate operator control cabinet.

How to select

Four checks before quotation.

Provide pipe outside diameter and wall thickness or SDR, including the 110 mm pipe specification if a 100 m coil is required.
Confirm the required reel inside diameter, outside diameter and width as one compatible configuration.
State the normal and maximum line speed; the specified maximum winding speed is 6.6 m/min.
Review coil securing, unloading access, handling equipment and plant electrical supply.

Integration checklist

Confirm the line interfaces.

Length measurement and cutting requirements
Coil securing and unloading arrangement
Extrusion-line signal interface
Plant voltage and frequency

Configuration review

Check the complete coil-handling sequence.

The photograph illustrates the equipment configuration. Final dimensions and included options are defined in the agreed quotation.

Machine configuration

40–110 mm HDPE Pipe Coiler

Confirm the pipe entry path, access for cutting and tying, and how a finished coil leaves the winding head. Include your heaviest coil and available handling equipment in the review.

Discuss station layout and coil handling

FAQ

Common selection questions.

Can this coiler wind 100 m of 110 mm HDPE pipe?

Yes. This machine can coil 100 m of HDPE pipe with an outside diameter of 110 mm. Provide the wall thickness or SDR and required coil dimensions so the reel setting and handling arrangement can be confirmed. This capacity statement is specific to 110 mm pipe.

Which reel dimensions are adjustable?

The reel inside diameter adjusts from 1,200 to 2,760 mm, and the reel width adjusts from 360 to 600 mm. The maximum reel outside diameter is 3,400 mm. Review these dimensions together for the selected pipe rather than assuming all limit settings can be combined.

Does the 415 mm arm height mean the reel width?

No. The 415 mm dimension is the winding arm height, which governs coil build thickness. The reel width is a separate adjustable dimension, from 360 to 600 mm.

What motor and maximum winding speed are specified?

The machine uses a 112-10-4 torque motor with 4 poles and a rated motor torque of 10 N·m. The maximum winding speed is 6.6 m/min. The motor torque rating should not be presented as the output torque at the winding reel.

What information is required to connect this coiler to an extrusion line?

Send the HDPE pipe OD and wall thickness or SDR, normal and maximum line speed, target coil dimensions, plant voltage and available floor space. Also describe the required length measurement, cutting, securing and unloading workflow.

Request a quote